2019 DOOSAN PUMA TT2100SYY
CNC Lathes Multi-Axis
Twin Turret, Twin Spindle, Y-Axis on Both Turrets, LNS Quick Six S2 Bar Feeder, Royal Rota-Rack, MP Systems High-Pressure Coolant, (4) Live Tool Holders, only 1,000 Cutting Hours. This 2019 Doosan Puma TT2100SYY is in plant, under power and available immediately.
| SWING OVER BED | 9.1" |
| MAX CUTTING DIAMETER | 9.1" |
| MAX CUTTING LENGTH | 9.1" |
| X-AXIS TRAVEL | 6.5" |
| Y-AXIS TRAVEL | 3.93" |
| Z-AXIS TRAVEL | 27.5" |
| C-AXIS INDEXING | FULL C-AXIS |
| CHUCK SIZE | 8" |
| BAR CAPACITY | 2.6" |
| SPINDLE NOSE | A2-6 |
| SPINDLE MOTOR | 35 hp |
| SPINDLE SPEED | 5,000 RPM |
| RAPID TRAVERSE RATE - X-AXIS | 1,181 in/min. |
| RAPID TRAVERSE RATE - Z-AXIS | 1,575 in/min. |
| SUB SPINDLE | Yes |
| SUB SPINDLE - CHUCK SIZE | 8" |
| SUB SPINDLE - BAR CAPACITY | 2.6" |
| SUB SPINDLE - SPINDLE NOSE | A2-6 |
| SUB SPINDLE - SPINDLE MOTOR | 25 hp |
| SUB SPINDLE - SPINDLE SPEED | 5,000 RPM |
| SUB SPINDLE / W-AXIS TRAVEL | 28.7" |
| TURRET 2 - X-AXIS TRAVEL | 6.5" |
| TURRET 2 - Z-AXIS TRAVEL | 27.56" |
| TURRET CAPACITY | 12 |
| LIVE MILLING | Yes |
| LIVE MILLING SPEED | 5,000 RPM |
| LIVE MILLING MOTOR | 10 hp |
| TURRET 2 CAPACITY | 12 |
| Y-AXIS | Yes |
DOOSAN-FANUC i SERIES CONTROL
LNS QUICK SIX S2 BAR FEEDER
ROYAL ROTA-RACK PARTS ACCUMULATOR
UPPER & LOWER TURRETS
Y-AXIS ON BOTH TURRETS
12 STATION TURRETS WITH 24 POSITION INDEXING
SUB SPINDLE
(2) ROYAL QG-65 COLLET CHUCKS
TOOL PRESETTER
PARTS CATCHER
CHIP CONVEYOR (LNS)
MP SYSTEMS HIGH-PRESSURE COOLANT UNIT (1,000 PSI)
(2) X-AXIS LIVE HOLDERS
(2) Z-AXIS LIVE HOLDERS
STANDARD FACTORY STATIC TOOLING
** AS OF DECEMBER 2023, CUTTING TIME - 1,053 HOURS
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
