| SWING OVER BED | 31.75" |
| MAX CUTTING DIAMETER | 16" |
| MAX CUTTING LENGTH | 23" |
| X-AXIS TRAVEL | 12.5" |
| Y-AXIS TRAVEL | +/- 2.00" |
| Z-AXIS TRAVEL | 26" |
| C-AXIS INDEXING | YES |
| CHUCK SIZE | 10" |
| BAR CAPACITY | 3" |
| SPINDLE NOSE | A2-6 |
| SPINDLE MOTOR | 30 hp |
| SPINDLE SPEED | 4,500 RPM |
| TURRET CAPACITY | 24 |
| TURRET TYPE | HYBRID BOT/VDI |
| LIVE MILLING | Yes |
| LIVE MILLING SPEED | 3,000 RPM |
| LIVE MILLING MOTOR | 5 hp |
| Y-AXIS | Yes |
HAAS SERVO BAR 300 BARFEEDER (2017)
Y-AXIS, LIVE MILLING, FULL C-AXIS
10", 3-JAW SAMCHULLY HYDRAULIC CHUCK
ROYAL QC-80 COLLET CHUCK AND MISC. SIZE COLLETS ALSO INCLUDED IN SALE
MISC. VDI HOLDERS
PROGRAMMABLE HYDRAULIC TAILSTOCK
TOOL PRESETTER
PARTS CATCHER
CHIP CONVEYOR (BELT-TYPE)
24-STATION HYDBRID TURRET
HIGH-PRESSURE COOLANT (300 PSI)
750 MB EXPANDED MEMORY
EARLY POWER FAILURE DETECTION
INTUITIVE PROGRAMMING SYSTEM (IPS)
SPINDLE LOAD MONITOR
SPINDLE ORIENTATION
VISUAL QUICK CODE
RIGID TAPPING
EXPANDED MEMORY
USB PORT
ALL ORIGINAL HAAS SLEEVES FOR BARFEEDER
TOOLING INCLUDED IN SALE:
* (2) 1:1 STANDARD EPPINGER EXSYS AXIAL LIVE TOOLS
* (1) 1:1 HAAS SS SPECIAL EPPINGER EXSYS AXIAL LIVE TOOL
* (1) 1:4 HEIMATEC ER-16 12,000 RPM OUTPUT AXIAL LIVE TOOL
* (3) STANDARD EPPINGER EXSYS RADIAL LIVE TOOLS
** HOURS HAVE BEEN RESET BECAUSE OF WORK PERFORMED BELOW. BUT MACHINE WAS USED IN SINGLE-SHIFT, AEROSPACE ENVIRONMENT
- UPDATES/IMPROVEMENTS PERFORMED ON MACHINE:
* 3/2018 NEW SPINDLE INSTALLED BY HAAS
* 5/2018 NEW LIVE TOOLING MOTOR INSTALLED BY HAAS
* 10/2018 NEW C-AXIS MOTOR INSTALLED BY HAAS
* REPLACEMENT COST FOR NEW MACHINE AS EQUIPPED ABOVE: $198,000
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
**** ALSO AVAILABLE IN SAME PLANT:
- 2018 HAAS UMC-1000 W/15,000 RPM HSK SPINDLE
- 2015 HAAS DT-1 W/ 20,000 RPM SPINDLE
- 2011 HAAS DT-1 W/12,000 RPM SPINDLE
