| SWING OVER BED | 21.7" |
| MAX CUTTING DIAMETER | 11.8" |
| MAX CUTTING LENGTH | 17.8" |
| X-AXIS TRAVEL | 8.5" |
| Z-AXIS TRAVEL | 19" |
| C-AXIS INDEXING | 0.001° |
| CHUCK SIZE | 10" |
| BAR CAPACITY | 3.2" |
| SPINDLE BORE | 3.62" |
| SPINDLE NOSE | A2-8 |
| SPINDLE MOTOR | 35.4 hp |
| SPINDLE SPEED | 3,500 RPM |
| RAPID TRAVERSE RATE - X-AXIS | 944 in/min. |
| RAPID TRAVERSE RATE - Z-AXIS | 1,181 in/min. |
| TURRET CAPACITY | 12 |
| TURRET TYPE | BMT55 |
| LIVE MILLING | Yes |
| LIVE MILLING SPEED | 6,000 RPM |
| LIVE MILLING MOTOR | 5 hp |
FANUC i SERIES CONTROL
10", 3-JAW CHUCK
12 STATION MILL TURRET
PROGRAMMABLE TAILSTOCK
MANUAL TOOL SETTER
PARTS CATCHER
TOOL MONITORING SYSTEM
87 PSI HIGH PRESSURE COOLANT SYSTEM
39.6 GALLON COOLANT TANK
CHIP CONVEYOR (HINGE-TYPE)
SPINDLE ORIENTATION
RIGID TAPPING
LNS BAR FEEDER INTERFACE
45° SLANTED ONE-PIECE BED STRUCTURE
TRI COLOR SIGNAL TOWER LIGHT
BOX GUIDEWAYS
LIVE TOOL MILL HOLDER (ER25):
(1) RADIAL (X)
(1) AXIAL (Z)
TURNING HOLDER:
(4) OD (L/R)
(1) CUTTING HOLDER
(1) FACE
BORING HOLDER:
(4) ID
(1) U-DRILL
SOCKETS:
BORING (1 OF EACH): 3/8", 1/2", 5/8", 3/4", 1", 1 1 /4"
ER COLLET (1 SET)
** ORIGINAL OWNER
** CUTTING PRIMARILY ALUMINUM
** AS OF MAY, 2022 - CUTTING TIME: 241 HOURS
** IN PLANT, UNDER POWER, READY FOR IMMEDIATE INSPECTION & PURCHASE
