MAZAK INTEGREX i-300S, 2012, GL-200F, 2800 HRS

MAZAK INTEGREX i-300S, 2012, GL-200F, 2800 HRS

Stock#: 490544

Product Description

2012 MAZAK INTEGREX I-300

SPECIFICATIONS:
SWING OVER BED 25.9″
MAX CUTTING DIAMETER 25.9″
MAX CUTTING LENGTH 59.8″
DISTANCE BETWEEN CENTERS 61.8″
X-AXIS TRAVEL 24.21″
Y-AXIS TRAVEL 9.84″
Z-AXIS TRAVEL 62.4″
C-AXIS INDEXING FULL C-AXIS (BOTH SPINDLES)
CHUCK SIZE 10″
BAR CAPACITY 3.15″
SPINDLE BORE 3.59″
SPINDLE NOSE A2-8
SPINDLE MOTOR 40 hp
SPINDLE SPEED 4,000 RPM
RAPID TRAVERSE RATE – X-AXIS 1,969 IPM.
RAPID TRAVERSE RATE – Y-AXIS 1,575 IPM.
RAPID TRAVERSE RATE – Z-AXIS 1,969 IPM.
SUB SPINDLE Yes
SUB SPINDLE – CHUCK SIZE 10″
B-AXIS MILLING SPEED 12,000 RPM
B-AXIS TOOL POSITIONS 72
B-AXIS ROTATION 240 DEGREES (-30/+210)
TURRET CAPACITY (STATIONS) 72
LIVE MILLING Yes
Y-AXIS Yes

EQUIPPED WITH:

MAZATROL MATRIX 2 CONVERSATIONAL CONTROL
MAZAK FLEX GL-200F GANTRY LOADER (D3 HAND)
B-AXIS MILLING SPINDLE
Y-AXIS
LIVE MILLING, FULL C-AXIS
W-AXIS TRAVEL 61.5″
LEFT & RIGHT TURNING SPINDLES
10″, 3-JAW KITAGAWA (B-210X) HYDRAULIC CHUCK (LEFT SPINDLE)
10″, 3-JAW KITAGAWA (BB210) HYDRAULIC CHUCK (RIGHT SPINDLE)
12,000 RPM (MILLING SPINDLE)
72-STATION TOOL CHANGER (CAPTO C8))
THROUGH-SPINDLE COOLANT (MILLING SPINDLE – 213 PSI)
B-AXIS 0.0001 DEGREE CONTOURING
ABSOLUTE POSITIONING
CHIP CONVEYOR
SIMULTANEOUS 5-AXIS
AUTOMATIC CHUCK OPEN & CLOSE (BOTH SPINDLES)
CHUCK AIR BLAST (RIGHT SPINDLE)
BALLSCREW COOLERS (X AXIS)

MAZATROL CONTROL OPTIONS (SEE PHOTOS FOR FULL LIST:)

THREAD START POINT COMPENSATION
ROT-AXIS SHAPE COMPENSATION
THREAD CUT-SPEED OVERRIDE
POLAR COORDINATES INPUT
3D COORDINATE ROTATION
GANTRY ROBOT CONTROL
TILTED WORKING PLANE
EIA 3D COMPENSATION
EIA HERICAL TAP CYCLE
SUB C-AXIS CONTROL
SYNC. MILL TAPPING
EIA PATTERN CYCLE
FLASH TOOL
GEOMETRIC
RE-THREAD
ROTATION
SCALING
THREAD
SPIRAL
G54.1
EIA

** AS OF 03/2020, TOTAL CUT TIME – 2,997 HOURS
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE

SIMILAR MACHINES