| SWING OVER BED | 25.9" |
| MAX CUTTING DIAMETER | 25.9" |
| MAX CUTTING LENGTH | 60.6" |
| X-AXIS TRAVEL | 19.5" |
| Y-AXIS TRAVEL | 9.8" (+/- 4.9") |
| Z-AXIS TRAVEL | 61.4" |
| CHUCK SIZE | 8" |
| BAR CAPACITY | 2.5" |
| SPINDLE BORE | 2.8" |
| SPINDLE NOSE | A2-6 |
| SPINDLE MOTOR | 30 hp |
| SPINDLE SPEED | 5,000 RPM |
| SUB SPINDLE | Yes |
| SUB SPINDLE - CHUCK SIZE | 8" |
| SUB SPINDLE - SPINDLE BORE | 2.8" |
| SUB SPINDLE - SPINDLE NOSE | A2-6 |
| SUB SPINDLE - SPINDLE MOTOR | 30 hp |
| SUB SPINDLE - SPINDLE SPEED | 5,000 RPM |
| TURRET 2 - X-AXIS TRAVEL | 6.3" |
| TURRET 2 - Z-AXIS TRAVEL | 55.2" |
| B-AXIS SPINDLE MOTOR | 25 hp |
| B-AXIS MILLING SPEED | 12,000 RPM |
| B-AXIS SPINDLE TAPER | CAPTO C6 |
| B-AXIS TOOL POSITIONS | 76 |
| B-AXIS ROTATION | +/- 120 DEGREES |
| LIVE MILLING | Yes |
| TURRET 2 CAPACITY | 10 |
| Y-AXIS | Yes |
| Dimensions | 200" X 120" |
F31iB5 CONTROL (WITH CELOS)
CELOS ERGOline TOUCH
5-AXIS SIMULTANEOUS CONTROL
B-AXIS MILLING SPINDLE
Y-AXIS
SUB SPINDLE
LOWER TURRET (BMT)
LIVE MILLING ON THE LOWER TURRET
8”, 3-JAW KITAGAWA BB208 HYDRAULIC CHUCKS (MAIN & SUB)
HIGH-TORQUE SPINDLES (MAIN & SUB)
RENISHAW RMP-60 TOOL SPINDLE PROBE UNIT
CHIP BLASTER D30-70 HIGH-PRESSURE COOLANT UNIT (1,000 PSI)
MISTBUSTER MIST COLLECTOR
TOOL PRESETTER
CHIP CONVEYOR
LARGE ASSORTMENT OF CAPTO C6 TOOL HOLDERS
** AS OF 10/2021, CUTTING TIME – 1,241 HOURS (HEAD 1)
** AS OF 10/2021 – CUTTING TIME – 588 HOURS (HEAD 2)
** FULL REPLACEMENT COST, AS EQUIPPED - $700,000
** MACHINE CUT PRIMARILY ALUMINUM & SOME STEEL
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
