Filters

84" x 34" travels, Through-Spindle Coolant, Probing System, only 3,900 Spindle Hours. This 2016 Hurco VMX84i vertical machining center is well-equipped & available in early March.

5.1" diameter boring spindle with 27.5" extension, 8.6" diameter milling spindle, 137" x 98" travels, 62" x 86" built-in rotary table. This 2012 SNK NISSIN BP130-3.5 cnc planer type horizontal bori...

CAT 50, 8,000 RPM, 30 ATC, Chip Conveyor. Built on a solid cast iron frame and equipped with brushless AC servos and a dual wound spindle, this 2016 Hurco VMX50i-50T 3-axis vertical machining cen...

Live Milling, Y-Axis, 10" Chuck, Tailstock, Presetter, 1,000 PSI HP. This 2011 Haas ST-30SSY multi-axis lathe is equipped with C-Axis live tooling, chip conveyor, and rigid tapping.

Excellent Condition machine with Chip conveyor, 12" chuck, and 12 position turret. This Mori Seiki NL-2500 CNC lathe is available for immediate inspection & purchase and was manufactured in October...

Haas VF3SS vertical machining center equipped with 12,000 RPM, very low hours and is 4th axis enabled.

Haas VF3SS vertical machining center equipped with 12,000 RPM, through spindle coolant and probing.

Probing, new 10,000 RPM installed in 2021, Wireless Probe and 24" Extended Z. This 2011 Haas GR-712 CNC gantry router is available immediately.

Rare Find Original Owner! 4th & 5th Axis Ready, TSC, 10K RPM Spindle, 50 Taper. This 2012 Haas VF-10 inline direct drive vertical machining center is equipped with a robust 45/60 HP, high speed ma...

Twin turret, twin spindle, Y-Axis, like-new, only 400 Cutting Hours. This 2019 Doosan Puma TT1800SY cnc lathe is in plant, under power and available immediately.

Haas TRT-160 CNC Trunnion Table available immediately. Machine up to five sides of a part and reach any compound angle.

Big Bore (7"), Live Milling, Gearbox, Extra Performance Spindle (55 HP), 18" chuck, Steady Rest Provision, Tailstock, only 1,300 Spindle Hours. This 2012 Haas ST-40 cnc lathe is loaded with options...

Clean! CAT40, 12,000 RPM, Probing, 40 ATC, 8,289 Spindle Hours. This less than single shift 2014 Hurco VMX64i vertical machining center also includes Renishaw probe, chip conveyor and has been cutt...

9,478 Power On Hours, Full 4th, 12,000 RPM, Through Spindle Coolant. A rare find, clean and ready to cut, this 2007 HAAS EC-300 horizontal machining center also includes the (2) pallet changer and...

1000 PSI Thru-Spindle Coolant, 12,000 RPM Spindle, 70 ATC. This Haas EC-400PP horizontal machining system comes with six pallet changer system and has a wireless intuitive probing system.

64" x 32" x 30" Travels, NextGen control, Side-Mount Tool Changer, 4th Axis Drive & Wiring, Beautiful Machine. This 2018 HAAS VF-6 vertical machining center is in plant, under power and available i...

8,395 Spindle Hours, 4th Axis, Through Spindle Coolant, 8,000 RPM, CAT 40, P-Cool, High Speed Machining. This 2007 Haas EC-500 horizontal machining center is also equipped with macros, spindle or...

Well equipped Haas DT-1 with Midaco Automatic Pallet changer, Wireless Intuitive Probing system

With High-Torque 2-Speed Gearbox, this Haas ST30 is prepared for heavy cutting. Includes the upgrade of 12" Power Chuck and belt type chip conveyor.

Manufactured 12/2011, this Haas ST30 Big Bore lathe was installed in 2012, has the 4" bar capacity and spindle gear-box option.

10,000 RPM Spindle, 10 ATC, Chip Auger. This Haas Super Mini Mill vertical machining center has a high flow coolant pump and programmable coolant.

Like new condition. 2015 Haas TM2P with 1,500 spindle hours. Machine has a coolant system, but never used. Only ever cut plastic.

This precision Hardinge SV-150 is small, fast, cheap and available immediately. It has a Fanuc control and chip auger.

12mm CNC Swiss Screw machine, this Tsugami is coming out of a precision West Coast plant and is available immediately. Machine is paired with Edge Minuteman 320 SE barfeed.

6" chuck, Tailstock, Tool Presetter, like-new, only 130 cutting hours. This 2016 Haas ST-10 cnc lathe is in plant, under power and available immediately.

This Haas EC-400PP CNC horizontal machining center has 70 ATC, 12,000 RPM spindle, a 6-Pallet system and through spindle coolant.

Through-Spindle Coolant (1,000 PSI), Renishaw Probing, 12,000 RPM, 5,000 Hours, (4) tombstones. This 2013 Haas EC-400 horizontal machining center is available immediately.

Installed in January of 2015, This Flow Mach 3 waterjet comes equipped with a 5-Axis XD cutting head and has only 2225 Hours of use.

This 2015 Haas UMC-750 5-axis universal machining center is under power and available immediately.

Big Bore (7"), 2-Speed Gearbox, Extra Performance Option (60 HP), 18" chuck, tailstock, chip conveyor. This 2012 Haas ST-40 cnc lathe is in plant, under power and available immediately.