| MAX SWING | 30" |
| SWING OVER CROSS SLIDE | 18.5" |
| MAX CUTTING DIAMETER | 30" |
| MAX CUTTING LENGTH | 60" |
| X-AXIS TRAVEL | 16" |
| Z-AXIS TRAVEL | 60" |
| CHUCK SIZE | 25" |
| SPINDLE BORE | 8.5" |
| SPINDLE NOSE | A2-15 |
| SPINDLE MOTOR | 30 hp |
| SPINDLE SPEED | 650 RPM |
| RAPID TRAVERSE RATE X-AXIS | 75 in/min. |
| RAPID TRAVERSE RATE Z-AXIS | 150 in/min. |
| Dimensions | 132" x 97" x 79" |
| Weight | 12,240lbs |
8.5" BIG BORE SPINDLE
2-SPEED GEARED HEADSTOCK
25" 3-JAW FRONT MANUAL CHUCK
25" 3-JAW REAR MANUAL CHUCK
FRONT & REAR A2-15 SPINDLE NOSES
TAILSTOCK MANUAL (MT #5)
QUICK CHANGE TOOL POST 1.5"
HIGH FLOW 3/4 HP COOLANT PUMP
INTUITIVE PROGRAMMING SYSTEM (IPS)
RND5 IPS HANDWHEEL
MANUAL HANDWHEEL
VECTOR DRIVE SPINDLE
SPINDLE LOAD MONITOR
SPINDLE DRIVE LINE ACCELERATOR
SPINDLE ENCODER
REVERSE SPINDLE ENCODER
EARLY POWER FAILURE DETECTION MODULE
EXACT STOP MODE CHANGE
COLOR LCD REMOTE JOG HANDLE
AIR HOSE BLOW GUN
TRAVELING CHIP GUARD
INTEGRAL CHIP-FLOW CHANNEL
15" COLOR LCD MONITOR
1 MB PROGRAM MEMORY
MEMORY LOCK KEY SWITCH
USB PORT INTERFACE
QUICK CODE
** ORIGINAL OWNER
** HALF SHIFT MACHINE
** AS OF FEBRUARY, 2021
-- POWER ON TIME: 17,975 HOURS
-- CUTTING TIME: 1,478 HOURS
** CUTTING PRIMARILY DOM 1026 STEEL TUBING
** PURCHASED NEW AS EQUIPPED IN 2012 FOR $160,000
** IN PLANT, UNDER POWER, AND READY FOR IMMEDIATE INSPECTION & PURCHASE
