Equipment
Turning
CNC Lathes Multi-Axis
2012 MAZAK INTEGREX i-300S & GL-200F
Sold

2012 MAZAK INTEGREX i-300S & GL-200F

Sell Your MAZAK INTEGREX i-300S
CNC Lathes Multi-Axis
Manufacturer:
MAZAK
Model:
INTEGREX i-300S
Year:
2012
Stock #:
490544
This 2012 Mazak Integrex i-300S cnc lathe features a GL-200F gantry loader, a b-axis milling spindle and a sub spindle. This multi-axis millturn Integrex i-300S is in plant, under power and available immediately. Only 2,900 cutting hours.

MAXIMUM SWING................. 25.9"
TURNING DIAMETER.............. 25.9"
TURNING LENGTH................ 59.8"
DISTANCE BETWEEN SPINDLES..... 61.8"
X-AXIS TRAVEL................. 24.21"
Z-AXIS TRAVEL................. 62.4"
Y-AXIS TRAVEL................. 9.84"
B-AXIS INDEXING............... 240 DEGREES (-30/+210)
C-AXIS INDEXING............... FULL C-AXIS (BOTH SPINDLES)
W-AXIS TRAVEL................. 61.5"
RAPID TRAVERSE RATE (X & Z)... 1969 IPM
RAPID TRAVERSE RATE (Y-AXIS).. 1575 IPM

TURNING SPINDLES (LEFT & RIGHT):

CHUCK SIZE.................... 10"
BAR CAPACITY.................. 3.15"
SPINDLE BORE.................. 3.59"
SPINDLE SPEED................. 4,000 RPM
SPINDLE MOTOR................. 40 HP (LEFT) / 35 HP (RIGHT)
SPINDLE NOSE.................. A2-8

B-AXIS MILLING SPINDLE:

SPINDLE SPEED................. 12,000 RPM
SPINDLE MOTOR................. 30 HP
TOOL HOLDER TYPE.............. CAPTO C6
TOOL POSITIONS................ 72 ATC
B-AXIS TRAVELS................ 240 DEGREES (-30/+210)

MAZATROL MATRIX 2 CONVERSATIONAL CONTROL
MAZAK FLEX GL-200F GANTRY LOADER (D3 HAND)
B-AXIS MILLING SPINDLE
Y-AXIS
LIVE MILLING, FULL C-AXIS
W-AXIS TRAVEL 61.5"
LEFT & RIGHT TURNING SPINDLES
10", 3-JAW KITAGAWA (B-210X) HYDRAULIC CHUCK (LEFT SPINDLE)
10", 3-JAW KITAGAWA (BB210) HYDRAULIC CHUCK (RIGHT SPINDLE)
12,000 RPM (MILLING SPINDLE)
72-STATION TOOL CHANGER (CAPTO C8))
THROUGH-SPINDLE COOLANT (MILLING SPINDLE - 213 PSI)
B-AXIS 0.0001 DEGREE CONTOURING
ABSOLUTE POSITIONING
CHIP CONVEYOR
SIMULTANEOUS 5-AXIS
AUTOMATIC CHUCK OPEN & CLOSE (BOTH SPINDLES)
CHUCK AIR BLAST (RIGHT SPINDLE)
BALLSCREW COOLERS (X AXIS)

MAZATROL CONTROL OPTIONS (SEE PHOTOS FOR FULL LIST:)

THREAD START POINT COMPENSATION
ROT-AXIS SHAPE COMPENSATION
THREAD CUT-SPEED OVERRIDE
POLAR COORDINATES INPUT
3D COORDINATE ROTATION
GANTRY ROBOT CONTROL
TILTED WORKING PLANE
EIA 3D COMPENSATION
EIA HERICAL TAP CYCLE
SUB C-AXIS CONTROL
SYNC. MILL TAPPING
EIA PATTERN CYCLE
FLASH TOOL
GEOMETRIC
RE-THREAD
ROTATION
SCALING
THREAD
SPIRAL
G54.1
EIA

** MACHINE HAS BEEN LIGHTLY USED
** AS OF 01/2021, TOTAL CUT TIME - 2,997 HOURS

** REPLACEMENT COST, AS EQUIPPED: $800,000
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE

We use cookies to improve your experience. Privacy Policy.

Accept