Sold

2000 TSCHUDIN HTG-610U

Sell Your TSCHUDIN HTG-610
Grinders, Universal Cylindrical
Manufacturer:
TSCHUDIN
Model:
HTG-610
Year:
2000
Stock #:
499083
For sale: 2000 Tschudin HTG-610U universal cylindrical grinder. Features include 26.77" distance between centers, dual wheel grinding head, Heidenhain 2-axis DRO, and variable speed control. Equipped with OEM manuals and more. Wired for 3-phase, 440V.

DISTANCE BETWEEN CENTERS....... 26.77"
HEIGH OF CENTERS............... 5.9"
POWER CONSUMPTION.............. 6.7 HP
WORKHEAD SPINDLE TAPER......... #5 MORSE
WORKHEAD SWIVELING RANGE....... 360 DEGREES
WORKHEAD SPINDLE SPEED RANGE... 65 TO 500 RPM (STEPLESS)
TAILSTOCK BARREL TAPER......... #3 MORSE
TAILSTOCK BARREL TRAVEL........ .78"
LEFT-HAND WHEEL DIAMETER....... 13.77"
RIGHT-HAND WHEEL DIAMETER...... 9.84"
LEFT-HAND WHEEL WIDTH.......... 1.96" MAX
RIGHT-HAND WHEEL WIDT.......... .98" MAX
WHEEL BORE DIAMETER............ 5"
MOTOR POWER.................... 4.02 HP
ADJUSTMENT TRAVEL ON SLIDE..... 6.69"
LEFT-HAND SWIVELING RANGE...... 45 DEGREES
RIGHT-HAND SWIVELING RANGE..... 90 DEGREES
TABLE SLIDE TRAVEL............. 24.4"
TABLE SPEED RANGE.............. 0 TO 16.40 FT PER MINUTE
TABLE SWIVELING RANGE.......... +/-8 DEGREES
WHEEL HEAD MANUAL SLIDE........ 1.77"
WHEELHEAD HYDRAULIC FAST APPR.. 1.57"
AUTO INFEED TRAVEL............. MAX .0472"/Ø
FINE INFEED TRAVEL............. MAX .0059/Ø
AUTO INFEED TRAVEL INCREMENTS.. MAX .0019"/Ø
SPARKOUT TIME.................. 2-30 SECONDS
HYDRAULIC UNIT TANK CAPACITY... 14.52 GALLONS
COOLANT UNIT TANK CAPACITY..... 33.02 GALLONS

RAISE/LOWER BALANCED FRONT GUARD
DUAL WHEEL GRINDING HEAD EQUIPPED TO ROTATE
HYDRAULIC CLAMPING
SWING DOWN INTERNAL GRINDING SPINDLE WITH VARIABLE SPEED CONTROL (MISSING DRIVE BELT)
HEIDENHAIN 2-AXIS DIGITAL READ OUT
VARIABLE SPEED WORK HEAD
(2) WHEEL ARBORS
PAPER MEDIA DRAG OUT COOLANT SYSTEM
OEM MANUALS
WIRED FOR 3 PHASE, 60 CYCLE, 440 VOLTS

FROM MANUAL: THE HGT 610U IS A HANDY-SIZED PRECISION CYLINDRICAL GRINDING MACHINE. IT HAS A NUMBER OF KEY FEATURES THAT MAKE IT IDEAL FOR PRODUCTION OF SINGLE PARTS AND SMALL BATCHES: THEY ARE VERY RIGID, PART LOADING AND UNLOADING IS EASY, THE CONTROL LAYOUT IS UNCOMPLICATED AND ACCESSIBLE, AND PLENTY OF POWER IS PACKED INTO A SMALL VOLUME. AND FINALLY, MAINTENANCE IS PROBLEM FREE. EVEN IN STANDARD FORM THE HTG 610U IS FULLY EQUIPPED SO ITS FULL CAPACITES CAN BE USED RIGHT FROM THE START.

NOTE: MACHINE CAME OUT OF GOVERNMENT STORAGE, VERY LITTLE USE, AND HAS BEEN COMPLETELY GONE THROUGH AND IS READY FOR EXCELLENT PERFORMANCE.

** AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE

We use cookies to improve your experience. Privacy Policy.

Accept