This German vintage 1966 Blohm Simplex 7 surface grinder has been well maintained and is ready to grind. Six grinding wheels as pictured are included.

.78", Live, Sub, 10,000 RPM, 16 Tool Positions, 12' LNS Barfeed. This single owner 2001 Citizen L20 VII 5M7 sliding head swiss lathe turning center cut less than 2 shifts per week and only ran oil.

10" Chuck, Tailstock, Chip Conveyor. This 1995 Daewoo Puma 10HC 2-Axis cnc lathe includes hydraulic chuck and Fanuc control.

Twin Turrets, Twin Spindles, Y-Axis, Live Milling, 10" chucks. This 2005 Daewoo Puma TT2500SY cnc lathe is in plant, under power and available immediately.

This Daewoo Puma 450A turning center was used to cut primarily 4130 and 4140 steel. It features the Fanuc 18-T control, a 35" swing, 25" chuck, 5" bore, tailstock, and chip conveyor.

31" Chuck, 157" Between Centers with 8-Position Turret. Heavy duty CNC Lathe, Japanese built, ideal for large capacity turning and interrupted cutting.

This Datron M75 vertical machining center is a compact high-speed machining center that can be used for milling, drilling, and engraving multiple materials. It features a 30,000 RPM spindle, 10 ATC...

Very clean, under utilized, never run a full shift. 12,000 RPM Spindle, 1,200 IPM Rapids. This DMG Mori DuraVertical 1035 ECO comes equipped with thru spindle coolant.

This DMG MORI NZX 2500/600L is a multi-axis turning center with two turrets and a 10" chuck. This cnc lathe is also equipped with auto door and robot interface.

4.5" Spindle Bore, Tailstock, Chip Conveyor. This 2006 Doosan Puma 300LC is in plant, under power and available immediately.

7.1" Bore, 21" Samchully chuck, Tailstock, Chip Conveyor, Gearbox, Box Way, 4,700 Cutting Hours. This 2014 Doosan Puma 400C cnc lathe is in plant, under power and available immediately.

B-Axis Mill Turn, Y-Axis, 4.5" Spindle Bore, Sub Spindle, Lower Turret, Live Milling, Edge Bar Feeder & Edge Bar Unloader, Low Hours, (2) Available. This 2018 Doosan Puma SMX3100ST cnc lathe is in-...

Installed new in January 2021. 308 cut hours as of March 3, 2022. Sub Spindle, Live Milling, Parts Catcher with High pressure coolant makes this Doosan Lynx 2100LMS ideally suited for front and bac...

Full 4th Axis, 120 Tools, Thru Spindle Coolant. This 2020 Doosan NHP 4000 horizontal machining center is available immediately.

Available Immediately - Unique, "like new" Doosan Puma TT1800SY with bar loader under 100cutting hours, new in December 2020. Dual Turrets, Dual Spindles with 2.6" Bar Cap and Y-axis make this un...

This Edge Technologies Patriot 551 barfeeder is designed to automatically feed round, square, and hexagonal barstock in fixed headstock and CNC Lathes. It features an 8' bar, channel for 1 5/8" bar...

This Edge Technologies Patriot 551 barfeeder is designed to automatically feed round, square, and hexagonal barstock in fixed headstock and CNC Lathes. It features an 8' bar, channel for 1 5/8" bar...

This Edge Technologies Patriot 551 barfeeder is designed to automatically feed round, square, and hexagonal barstock in fixed headstock and CNC Lathes. It features an 8' bar, channel for 1 5/8" bar...

This Edge Technologies Patriot 551 barfeeder is designed to automatically feed round, square, and hexagonal barstock in fixed headstock and CNC Lathes. It features an 8' bar, channel for 1 5/8" bar...

This Edge Technologies Patriot 551 barfeeder is designed to automatically feed round, square, and hexagonal barstock in fixed headstock and CNC Lathes. It features an 8' bar, and channel for 1 3/4"...

This Edge Technologies Patriot 551 barfeeder is designed to automatically feed round, square, and hexagonal barstock in fixed headstock and CNC Lathes. It features an 8' bar, channel for 2" bar, an...

This Edge Technologies Rebel 102 Servo SE barfeeder is a compact bar loading system for use with CNC lathes. It has a 30" magazine capacity, 60" bar length, and a 4" bar diameter.

This unloader is ideally equipped to greatly increase productivity. Originally installed on a 2020 Doosan Puma TT-1800SY, this enables the manufacturer to feed parts in and out as a finished produc.

6-Axis, 79" Reach, 22 LBS Payload. This 2012 FANUC Robot M-20iA/10L with the FANUC R-30iB mate controller is ideal for dispensing and painting, assembly, material handling and removal, picking an...

This 5.12" Capacity Fermat WFT 13 CNC Horizontal Boring Mill has a built in rotary table and through spindle coolant.

Installed in January of 2015, This Flow Mach 3 waterjet comes equipped with a 5-Axis XD cutting head and has only 2225 Hours of use.

This Flow I-6012 waterjet has an integreted flying bridge and dynamic head. This machine was just gone through by an expert technician.

6-Axis, CNC Table Type Horizontal Boring Mill with Fanuc 160i-MB control and built in Rotary Table. This Giddings & Lewis PC-50 machine has 60 ATC, Thru Spindle Coolant and hardened and ground boxw...

GODFREY & WING 36 INCH WET VAC IMPREGNATOR (2011)

Haas NextGen Control, Renishaw Probing System, 4th Axis Drive & Wiring, 1,300 Cutting Hours, (2) Available. This 2016 Haas VF-2 vertical machining center is in plant, under power and available imme...