DN SOLUTIONS PUMA GT3100M
ConditionUsed
1 available
2023 used DN Solutions DOOSAN PUMA GT 3100 M multi-axis CNC lathe with live milling. Features Royal collet chuck, 4" bar capacity, 14.8" max cutting diameter, 28.5" max cutting length and 2,800 RPM spindle speed.
FANUC I-SERIES CNC
PROGRAMMABLE TAILSTOCK
PARTS CATCHER
LNS TURBO HB CHIP CONVEYOR
ROYAL COLLET CHUCK
12 STATION (24 POSITION INDEX) TURRET
TOOL SETTER
REPLACEMENT COST FOR ABOVE EQUIPPED SYSTEM IF PURCHASED NEW: $230,000
HOURS OF USE (AS OF 10/27/2026):
* POWER ON: 8,674 HOURS
HISTORY: SINGLE SHIFT SHOP
MACHINE IS IN AN AUCTION NOVEMBER 18 AND AVAILABLE FOR PRE-SALE
2023 used DN Solutions DOOSAN PUMA GT 3100 M multi-axis CNC lathe with live milling. Features Royal collet chuck, 4" bar capacity, 14.8" max cutting diameter, 28.5" max cutting length and 2,800 RPM spindle speed.
Imperial
| SWING OVER BED | 28.3" |
| SWING OVER SADDLE | 23.2" |
| MAX CUTTING DIAMETER | 14.8" |
| MAX CUTTING LENGTH | 28.5" |
| X-AXIS TRAVEL | 10.2" |
| Y-AXIS | No |
| Z-AXIS TRAVEL | 32.7" |
| C-AXIS INDEXING | 0.001 |
| BAR CAPACITY | 4" |
| SPINDLE BORE | 4.5" |
| SPINDLE NOSE | A2-11 |
| SPINDLE SPEED | 2,800 RPM |
| RAPID TRAVERSE RATE - X-AXIS | 945 in/min. |
| RAPID TRAVERSE RATE - Z-AXIS | 1,181 in/min. |
| TURRET CAPACITY | 12 |
| TURRET TYPE | BMT65 |
| LIVE MILLING | Yes |
| LIVE MILLING SPEED | 5,000 RPM |
| LIVE MILLING MOTOR | 10.1 hp |
| Dimensions | 152.2" x 82.8" x 83.1" |
| Weight | 12,458 |
FANUC I-SERIES CNC
PROGRAMMABLE TAILSTOCK
PARTS CATCHER
LNS TURBO HB CHIP CONVEYOR
ROYAL COLLET CHUCK
12 STATION (24 POSITION INDEX) TURRET
TOOL SETTER
REPLACEMENT COST FOR ABOVE EQUIPPED SYSTEM IF PURCHASED NEW: $230,000
HOURS OF USE (AS OF 10/27/2026):
* POWER ON: 8,674 HOURS
HISTORY: SINGLE SHIFT SHOP
MACHINE IS IN AN AUCTION NOVEMBER 18 AND AVAILABLE FOR PRE-SALE
We use cookies to improve your experience. Privacy Policy.