2012 HAAS ST-20Y, Y-AXIS, TAILSTOCK, PARTS CATCHER, LOW HOURS
ConditionUsed
1 available
Y-Axis, Live Milling, 8" chuck, Programmable Tailstock, Tool Presetter, Parts Catcher, Chip Conveyor, (2) Live Holders, 3,800 Cutting Hours. This 2012 Haas ST-20Y is in plant, under power and available immediately.
Y-AXIS
LIVE MILLING
8”, 3-JAW HYDRAULIC CHUCK
PROGRAMMABLE TAILSTOCK
TOOL PRESETTER
PARTS CATCHER
CHIP CONVEYOR
SPINDLE ORIENTATION
RIGID TAPPING
USB PORT
(1) RADIAL LIVE TOOL HOLDER
(1) AXIAL LIVE TOOL HOLDER
** AS OF NOVEMBER 2026, FEED CUTTING TIME – 3,821 HOURS
** FULL REPLACEMENT COST, AS EQUIPPED - $140,000
** MACHINE CUT PRIMARILY ALUMINUM, STAINLESS & TITANIUM
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
** 2015 HAAS TL-2 ALSO AVAILABLE IN THE SAME SHOP
Y-Axis, Live Milling, 8" chuck, Programmable Tailstock, Tool Presetter, Parts Catcher, Chip Conveyor, (2) Live Holders, 3,800 Cutting Hours. This 2012 Haas ST-20Y is in plant, under power and available immediately.
Imperial
| MAX CUTTING DIAMETER | 12" |
| MAX CUTTING LENGTH | 21" |
| X-AXIS TRAVEL | 9.3" |
| Y-AXIS | Yes |
| Y-AXIS TRAVEL | +/- 2" |
| Z-AXIS TRAVEL | 21" |
| CHUCK SIZE | 8" |
| BAR CAPACITY | 2" |
| SPINDLE NOSE | A2-6 |
| SPINDLE MOTOR | 20 hp |
| SPINDLE SPEED | 4,000 RPM |
| TURRET CAPACITY | 12 |
| TURRET TYPE | HYBRID BOT/VDI |
| LIVE MILLING | Yes |
Y-AXIS
LIVE MILLING
8”, 3-JAW HYDRAULIC CHUCK
PROGRAMMABLE TAILSTOCK
TOOL PRESETTER
PARTS CATCHER
CHIP CONVEYOR
SPINDLE ORIENTATION
RIGID TAPPING
USB PORT
(1) RADIAL LIVE TOOL HOLDER
(1) AXIAL LIVE TOOL HOLDER
** AS OF NOVEMBER 2026, FEED CUTTING TIME – 3,821 HOURS
** FULL REPLACEMENT COST, AS EQUIPPED - $140,000
** MACHINE CUT PRIMARILY ALUMINUM, STAINLESS & TITANIUM
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
** 2015 HAAS TL-2 ALSO AVAILABLE IN THE SAME SHOP
We use cookies to improve your experience. Privacy Policy.