| SWING OVER BED | 10.62" | 269.75 mm |
| MAX CUTTING DIAMETER | 9.84" | 249.94 mm |
| MAX CUTTING LENGTH | 23.3" | 591.82 mm |
| X-AXIS TRAVEL | 7.67" | 194.82 mm |
| Y-AXIS | Yes | Yes |
| Y-AXIS TRAVEL | 3.93" = ± 1.96" | 3.93" = ± 1.96" |
| Z-AXIS TRAVEL | 24.4" | 619.76 mm |
| CHUCK SIZE | 8" | 203.2 mm |
| BAR CAPACITY | 2.55" | 64.77 mm |
| SPINDLE BORE | 2.99" | 75.946 mm |
| SPINDLE NOSE | A2-6 | A2-6 |
| SPINDLE MOTOR | 20 hp | 14.9 kW |
| SPINDLE SPEED | 4,000 RPM | 4,000 RPM |
| RAPID TRAVERSE RATE - X-AXIS | 945 in/min. | 24 m/min. |
| RAPID TRAVERSE RATE - Y-AXIS | 394 in/min. | 10 m/min. |
| RAPID TRAVERSE RATE - Z-AXIS | 945 in/min. | 24 m/min. |
| SUB SPINDLE | Yes | Yes |
| SUB SPINDLE - CHUCK SIZE | 8" | 203.2 mm |
| SUB SPINDLE - BAR CAPACITY | 2.55" | 64.77 mm |
| SUB SPINDLE - SPINDLE BORE | 2.99" | 75.946 mm |
| SUB SPINDLE - SPINDLE NOSE | A2-6 | A2-6 |
| SUB SPINDLE - SPINDLE MOTOR | 20 hp | 14.9 kW |
| SUB SPINDLE - SPINDLE SPEED | 4,000 RPM | 4,000 RPM |
| TURRET CAPACITY | 16 | 16 |
| LIVE MILLING | Yes | Yes |
| LIVE MILLING SPEED | 6,000 RPM | 6,000 RPM |
| LIVE MILLING MOTOR | 7.3 hp | 5.4 kW |
| TURRET 2 CAPACITY | 16 | 16 |
| TURRET 2 - X-AXIS TRAVEL | 7.67" | 194.82 mm |
| TURRET 2 - Z-AXIS TRAVEL | 24.4" | 619.76 mm |
| Control | CNC (FANUC 31I) | CNC (FANUC 31I) |
| Dimensions | 176"L x 101"W x 93"H | 176"L x 101"W x 93"H |
| Weight | 19,000 LBS | 19,000 LBS |
FANUC 31i CONTROL G.LINC 350
Y-AXIS (UPPER TURRET)
C-AXIS (BOTH TURRETS)
TWIN BIG BORE SPINDLES & TWIN TURRETS
16-STATION TURRET (UPGRADE)
MAX TOOL STATION CAPACITY IS UP TO 32 TOOLS
COOLANT THROUGH SPINDLE
RENISHAW TOOL PRESETTER
(2) MICROCENTRIC COLLET CHUCKS
(2) 3-JAW 8" HYDRAULIC CHUCKS
LONG PARTS EJECTOR (SUB)
PARTS CATCHER
PARTS CONVEYOR
CHIP CONVEYOR
BARFEED INTERFACE
ALLCOOL HIGH PRESSURE COOLANT SYSTEM (1000 PSI)
COOLANT FLUSH SLIDE WAY COVERS
ROLLER TYPE LINEAR GUIDE WAYS
(2) SETS ADDITIONAL M-CODES
TOOLING INCLUDED:
(3) AXIAL
(3) RADIAL
MULTI-TASKING CAPABILITIES:
WORK-PIECE MOVED BETWEEN SPINDLES
DUAL TURRET WORK ON THE WORK-PIECE SIMULTANEOUSLY
UPPER TURRET WORK ON RIGHT SPINDLE & LOWER TURRET WORK ON LEFT SPINDLE
UPPER TURRET WORK ON LEFT SPINDLE & LOWER TURRET WORK ON RIGHT SPINDLE
** ORIGINAL OWNER
** AS OF OCTOBER, 2023 - CUTTING TIME: 843 HOURS
** BUILT OCTOBER, 2018 & INSTALLED FEBRUARY, 2019
** MACHINE REPLACEMENT COST NEW: $295,000
** IN PLANT, UNDER POWER, & READY FOR IMMEDIATE INSPECTION & PURCHASE
We use cookies to improve your experience. Privacy Policy.
We use different type of cookies to optimize your experience on our website. You may choose which type of cookies to allow and can change your preferences at any time. Remember that disabling cookies may affect your experience on the website. You can learn more about how we cookies by visiting our Privacy Policy.
These cookies are necessary to the core functionality our website and some of its features, such as access to secure areas.
These cookies are used to enhance the performance and functionality of our website but are nonessential. However, without these cookies, certain functionality may become unavailable.
These cookies gather information to help us understand site usage, measure marketing effectiveness, and personalize your experience.
These cookies enhance ad relevance, prevent repeat ads, ensure proper display, and sometimes tailor ads to your interests.
