2021 OKUMA 2SP-V760EX, LIVE MILLING, 18" CHUCKS
ConditionUsed
1 available
Maximum Productivity with Minimum Floor Space. Twin-Spindle Vertical Lathe, OSP-P300LA Control, (2) 40HP, A2-11, 2,000 RPM Spindles, (2) 18" chucks, (2) 12-Station Turrets, Live Milling (each turret), Advanced One-Tough IGF, only 3,500 Cutting Hours. This 2021 Okuma 2SP-V760EX is in plant, under power and available immediately.
TWIN-SPINDLE VERTICAL LATHE
OKUMA OSP-P300LA CONTROL
(2) 40HP, A2-11, 2,000 RPM SPINDLES
(2) 18”, 3-JAW, CLOSED CENTER HYDRAULIC CHUCKS
(2) 12-STATION TURRETS
LIVE MILLING (BOTH TURRETS)
TOUCH SETTER (BOTH SPINDLES)
REAR DISCHARGE CHIP CONVEYOR
(2) 300 PSI COOLANT PUMPS (MP SYSTEMS)
PREPPED FOR HIGH-PRESSURE COOLANT (1,000 PSI)
THERMAL COMPENSATION
ADVANCED ONE-TOUCH IGF
HELICAL CUTTING (FOR X/Z/C AXES)
NEGATIVE TOOL RADIUS COMPENSATION
(4) AXIAL LIVE TOOL HOLDERS
(4) RADIAL LIVE TOOL HOLDERS
AN ASSORTMENT OF STATIC TOOL HOLDERS
** AS OF SEPTEMBER 2026, CUTTING TIME – 3,689 HOURS
** MACHINE CUT PRIMARILY ALUMINUM
** OSP DATA CARD AVAILABLE UPON REQUEST
** FULL REPLACEMENT COST, AS EQUIPPED - $700,000
** IN PLANT, UNDER POWE, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
** MACHINE IS AVAILABLE TO BE REMOVED AT THE END OF NOVEMBER/EARLY DECEMBER – UPON ARRIVAL OF NEW MACHINE
Maximum Productivity with Minimum Floor Space. Twin-Spindle Vertical Lathe, OSP-P300LA Control, (2) 40HP, A2-11, 2,000 RPM Spindles, (2) 18" chucks, (2) 12-Station Turrets, Live Milling (each turret), Advanced One-Tough IGF, only 3,500 Cutting Hours. This 2021 Okuma 2SP-V760EX is in plant, under power and available immediately.
Imperial
| MAX SWING | 31.5" |
| MAX CUTTING DIAMETER | 29.92" |
| MAX CUTTING LENGTH | 30.31" |
| CHUCK SIZE | 18" |
| MAX WEIGHT ON TABLE | 1,100 lb |
| X-AXIS TRAVEL | 15.35" |
| Z-AXIS TRAVEL | 30.31" |
| SPINDLE SPEED | 2,000 RPM |
| SPINDLE MOTOR | 40 hp |
| LIVE TOOLING SPEED | 4,000 RPM |
| LIVE TOOLING MOTOR | 10 hp |
| TURRET POSITIONS | 12 |
TWIN-SPINDLE VERTICAL LATHE
OKUMA OSP-P300LA CONTROL
(2) 40HP, A2-11, 2,000 RPM SPINDLES
(2) 18”, 3-JAW, CLOSED CENTER HYDRAULIC CHUCKS
(2) 12-STATION TURRETS
LIVE MILLING (BOTH TURRETS)
TOUCH SETTER (BOTH SPINDLES)
REAR DISCHARGE CHIP CONVEYOR
(2) 300 PSI COOLANT PUMPS (MP SYSTEMS)
PREPPED FOR HIGH-PRESSURE COOLANT (1,000 PSI)
THERMAL COMPENSATION
ADVANCED ONE-TOUCH IGF
HELICAL CUTTING (FOR X/Z/C AXES)
NEGATIVE TOOL RADIUS COMPENSATION
(4) AXIAL LIVE TOOL HOLDERS
(4) RADIAL LIVE TOOL HOLDERS
AN ASSORTMENT OF STATIC TOOL HOLDERS
** AS OF SEPTEMBER 2026, CUTTING TIME – 3,689 HOURS
** MACHINE CUT PRIMARILY ALUMINUM
** OSP DATA CARD AVAILABLE UPON REQUEST
** FULL REPLACEMENT COST, AS EQUIPPED - $700,000
** IN PLANT, UNDER POWE, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
** MACHINE IS AVAILABLE TO BE REMOVED AT THE END OF NOVEMBER/EARLY DECEMBER – UPON ARRIVAL OF NEW MACHINE
We use cookies to improve your experience. Privacy Policy.