2023 HAAS ST-20 & HAAS BAR FEEDER
ConditionUsed
1 available
2023 HAAS ST-20 and Barfeed, used CNC Lathe with 2-axis, offering a max swing of 31.75", 8" chuck, 20 HP spindle, and speeds up to 4,000 RPM. Equipped with parts catcher, chip conveyor, collet chuck. MUCH TOOLING. Currently available.
HAAS CNC CONTROL
LARGE AMOUNT OF COLLETS AND TOOLING
HAAS BAR FEEDER
SAMCHULLY 8" 3-JAW HYDRAULIC CHUCK (IN DRAWER)
ROYAL COLLET CHUCK (INSTALLED)
HENNIG CHIP CONVEYOR
TOOL PRESETTER
PARTS CATCHER
COOLANT TANK
USB PORT
MACROS
1GB MEMORY
M19 SPINDLE ORIENT
QUICK CODE
RIGID TAPPING
SPINDLE LOAD MONITOR
*** COMPANY CLOSING BUSINESS. ALL TOOL HOLDERS, COLLETS, ETC THAT ARE USED BY THIS MACHINE -- INCLUDED IN SALE.
MACHINE COMING OUT OF OWNER/OPERATOR, PARTIAL SHIFT ENVIRONMENT
THIS IS A CHUCKER STYLE LATHE. MACHINE IS NOT EQUIPPED WITH TAILSTOCK. BUT THE ADDITION OF THE BARFEED AND PARTS CATCHER CREATE A 2-AXIS PRODUCTION ENVIRONMENT READY FOR LIGHTS-OUT RUNS.
REPLACEMENT COST FOR ABOVE EQUIPPED LATHE SYSTEM IF PURCHASED NEW TODAY: $121,000
** MACHINE IS IN OWNER/OPERATOR SINGLE SHIFT SHOP. AVAILABLE IMMEDIATELY
---- IN SAME SHOP: 2019 HAAS VF2 W/4TH AXIS, TSC AND WIPS
2023 HAAS ST-20 and Barfeed, used CNC Lathe with 2-axis, offering a max swing of 31.75", 8" chuck, 20 HP spindle, and speeds up to 4,000 RPM. Equipped with parts catcher, chip conveyor, collet chuck. MUCH TOOLING. Currently available.
Imperial
| MAX SWING | 31.75" |
| MAX CUTTING DIAMETER | 15" |
| MAX CUTTING LENGTH | 20.5" |
| CHUCK SIZE | 8.3" |
| BAR CAPACITY | 2" |
| SPINDLE MOTOR | 20 hp |
| SPINDLE SPEED | 4,000 RPM |
| TURRET POSITIONS | 12 |
| TURRET TYPE | BOLT-ON |
HAAS CNC CONTROL
LARGE AMOUNT OF COLLETS AND TOOLING
HAAS BAR FEEDER
SAMCHULLY 8" 3-JAW HYDRAULIC CHUCK (IN DRAWER)
ROYAL COLLET CHUCK (INSTALLED)
HENNIG CHIP CONVEYOR
TOOL PRESETTER
PARTS CATCHER
COOLANT TANK
USB PORT
MACROS
1GB MEMORY
M19 SPINDLE ORIENT
QUICK CODE
RIGID TAPPING
SPINDLE LOAD MONITOR
*** COMPANY CLOSING BUSINESS. ALL TOOL HOLDERS, COLLETS, ETC THAT ARE USED BY THIS MACHINE -- INCLUDED IN SALE.
MACHINE COMING OUT OF OWNER/OPERATOR, PARTIAL SHIFT ENVIRONMENT
THIS IS A CHUCKER STYLE LATHE. MACHINE IS NOT EQUIPPED WITH TAILSTOCK. BUT THE ADDITION OF THE BARFEED AND PARTS CATCHER CREATE A 2-AXIS PRODUCTION ENVIRONMENT READY FOR LIGHTS-OUT RUNS.
REPLACEMENT COST FOR ABOVE EQUIPPED LATHE SYSTEM IF PURCHASED NEW TODAY: $121,000
** MACHINE IS IN OWNER/OPERATOR SINGLE SHIFT SHOP. AVAILABLE IMMEDIATELY
---- IN SAME SHOP: 2019 HAAS VF2 W/4TH AXIS, TSC AND WIPS
We use cookies to improve your experience. Privacy Policy.